hier mal ein ausschnitt aus dem datenblatt des laserarrays :
Code: Select all
Brief Description
Laser array module providing two seperate radation sources of different size, viz-
A-750x100um
B-125x210um
Power output into f/2.7 aperture at +40C°, for 36A peak drive current at 0.018% duty factor:
A-9.0W min
B-3.3W min
Wavelenght : 900nm min
RATINGS
Absolute limiting values in accordance with IEC 134.
Pulse current at 0.02% duty factor 45A max
Pulse width 200ns max
Operating Ambient Temperature Range -10C°to +60C°
CHARACTERISTICS
Measured under the following conditions
p.r.f. 1000Hz, peak current 36A
pulse width 180ns, temperature +40C°
Peak power output into aperture
of f/2.7 on axis -
MIN MAX UNITS
Source A 9.0W 20 W
Source B 3.3W 6.0 W
Wavelenght 900 913 nm
die dioden sind eckig und haben die masse 1,6x3,4cm, hab sie mal auseinandergedremelt und zum vorschein kamen ziemlich viele von der diode ausgehende glasfasern die sich alle bündeln.