Bonjour, j'ai deux laser rgb de chez Laserworld, et j'en ai un qui a un scanner qui chante(bruit tres aigue et fort et du coup coupe le laser de son alimentation.
selon Laserworld, la carte des ampli de Scan serait HS et le problème est qu'il n'est plus fabriqué.
qq'un en aurait en stock ou a vendre?ou qui saurait me dépanner???
LASERWORLD PM 3500 RGB
Moderators: dj_richu, Moderator (French Zone)
-
Tigibus97400
- Posts: 3
- Joined: Sun 11 Jul, 2021 6:19 am
- Do you already have Laser-Equipment?: Pangolin, Beyon, Ld2000, etc….
Laserworld 24w rgb*1
Laserworld 3,2w rgb*2
ALC68*2
Coherent 8 w mix gas*1
Boîtes à effet etc…
Spectra physic 22w mix gas*1
-
guido
- Posts: 6446
- Joined: Thu 20 Dec, 2001 12:00 pm
- Do you already have Laser-Equipment?: Easylase, Netlase, Laser von 1..15W.
Entwickler von Dynamics + Mamba X4 .
Lasershow Hard / Software . - Location: 32469 Petershagen
- Contact:
Re: LASERWORLD PM 3500 RGB
Hello,
can you please post a Picture of the Device inside ?
If its the one i think there is a Service Station for theese located in Germany.
Maybe he can help. Exchanging the whole PCB wouldnt be cheap but if the rest is OK...
Greetings
Guido
can you please post a Picture of the Device inside ?
If its the one i think there is a Service Station for theese located in Germany.
Maybe he can help. Exchanging the whole PCB wouldnt be cheap but if the rest is OK...
Greetings
Guido
Gruss
Guido
www.mylaserpage.de Dynamics Lasershowsoftware Dynamics Phototour
- Gewerbliches Mitglied -
Guido
www.mylaserpage.de Dynamics Lasershowsoftware Dynamics Phototour
- Gewerbliches Mitglied -
-
Tigibus97400
- Posts: 3
- Joined: Sun 11 Jul, 2021 6:19 am
- Do you already have Laser-Equipment?: Pangolin, Beyon, Ld2000, etc….
Laserworld 24w rgb*1
Laserworld 3,2w rgb*2
ALC68*2
Coherent 8 w mix gas*1
Boîtes à effet etc…
Spectra physic 22w mix gas*1
Re: LASERWORLD PM 3500 RGB
voici les photos de l'intérieur du laser
You do not have the required permissions to view the files attached to this post.
-
guido
- Posts: 6446
- Joined: Thu 20 Dec, 2001 12:00 pm
- Do you already have Laser-Equipment?: Easylase, Netlase, Laser von 1..15W.
Entwickler von Dynamics + Mamba X4 .
Lasershow Hard / Software . - Location: 32469 Petershagen
- Contact:
Re: LASERWORLD PM 3500 RGB
Hi,
the Service Station in Germany is closed. Contact swisslas.ch. Beat is the Manufacturer of this Devices.
Maybe he can help. Note that this is outside Europe. If you send your Projector to them it is an Export and you maybe have
to pay Tax when he come Back. So ask you Shipping Company for Export Papers.
the Service Station in Germany is closed. Contact swisslas.ch. Beat is the Manufacturer of this Devices.
Maybe he can help. Note that this is outside Europe. If you send your Projector to them it is an Export and you maybe have
to pay Tax when he come Back. So ask you Shipping Company for Export Papers.
Gruss
Guido
www.mylaserpage.de Dynamics Lasershowsoftware Dynamics Phototour
- Gewerbliches Mitglied -
Guido
www.mylaserpage.de Dynamics Lasershowsoftware Dynamics Phototour
- Gewerbliches Mitglied -
-
adminoli
- Posts: 3955
- Joined: Wed 04 Oct, 2006 11:37 am
- Do you already have Laser-Equipment?: Dynamics und diverse Projektoren
- Location: nähe Schweinfurt/Würzburg, Bayern, Franken
Re: LASERWORLD PM 3500 RGB
Hi,
Swisslas is in Europe, but not in the EU, so customs is due!
Greetings
Oli
Swisslas is in Europe, but not in the EU, so customs is due!
Greetings
Oli
-
vakuum
- Posts: 1467
- Joined: Wed 09 Nov, 2005 10:55 am
- Do you already have Laser-Equipment?: Vieles zwischen 1 und 50 Watt
- Location: Near ZĂĽrich Schweiz
- Contact:
Re: LASERWORLD PM 3500 RGB
contact me by e-mail: info@swisslas.ch
It is no problem to repair and all spare parts are available.
Did you check the cable between scanner driver and scanner motor? If you touch it and move it perhaps the noise can switch off?
If not, I think scanner motor is damaged (overloaded).
kind regards
Beat
It is no problem to repair and all spare parts are available.
Did you check the cable between scanner driver and scanner motor? If you touch it and move it perhaps the noise can switch off?
If not, I think scanner motor is damaged (overloaded).
kind regards
Beat
-
philippe69
- Posts: 483
- Joined: Sun 20 Jan, 2013 5:15 am
- Do you already have Laser-Equipment?: 1 laser 2w 532 nm
Scanner 40 kpps
1 laser Aworldlaser 6w rgb Scanner pangolin 506
4 laser Aworldlaser RGB 10w scanner DT40 60 degrés
1 laser Aworldlaser 14w rgb Scanner DT40 60 degrés
Red 637 blue 465 green 520
1 laser Aworldlaser 14w RGB Scanner DT50w 80 degrés
2 laser Aworldlaser 20w RGB scanner DT40 60 degrés
1 laser Aworldlaser 32w RGB Scanner DT50B 60 degrés
4 laser Aworldlaser 35w RGB Scanner DT50B 60 degrés
1 laser Aworldlaser 45w RGB scanner DT50C 60 degrés - Location: LYON
- Contact:
Re: LASERWORLD PM 3500 RGB
slt Ce sont des 30k il y en a pour 120 dollars pour avoir une paire toute neuve les cartes électroniques sont beaucoup plus petites maintenant ça prendra moins de place et facile à installer personnellement je me prendrai pas la tête
Facebook Philippe Aworldlaser
-
Tigibus97400
- Posts: 3
- Joined: Sun 11 Jul, 2021 6:19 am
- Do you already have Laser-Equipment?: Pangolin, Beyon, Ld2000, etc….
Laserworld 24w rgb*1
Laserworld 3,2w rgb*2
ALC68*2
Coherent 8 w mix gas*1
Boîtes à effet etc…
Spectra physic 22w mix gas*1
Re: LASERWORLD PM 3500 RGB
Bonjour Philippe
Apres un arrêt conséquent sur la plateforme de laserfreak par manque de temps et bcp de travail, je souhaiterais savoir ou on peut se procurer ce type scanner?
Apres un arrêt conséquent sur la plateforme de laserfreak par manque de temps et bcp de travail, je souhaiterais savoir ou on peut se procurer ce type scanner?
Who is online
Users browsing this forum: No registered users and 3 guests