Hi
I have big problem with my riya PCI PRO cards . I bought two cards but not identical version. Used drivers for win XP from riyalasers. Look on this movie what is going on with one card:
www.ultra.biz.pl/riya.wmv
I used TestProgram from RiyaLasers.
If I give gain up of color, galvos is working too. I don't know why. If I try paint some is ok. Second Card is detect on LaStudio 6.0 but is not working ;/
Do I need some new driver? or maybe some connection
Best Rigards, Maciej
TWO RIYA CARDS WHAT DRIVERS, LOOK>> MOVIE
-
tracky
- Posts: 4869
- Joined: Tue 11 Mar, 2003 1:51 pm
- Do you already have Laser-Equipment?: Hat sich im Laufe der Jahre doch einiges angesammelt
- Location: Germany, Seefeld bei Werneuchen
- Contact:
Can you give us some information about your settings. IRQ Setting . . .
Please make a sreen shot of your settings!
I think your problem comes from the IRQ settings in your hardware management.
You must install the driver for one time. Starting with the setup.exe!
When you configure your second card, you can use the same driver file inside of your system32. (*.inf)
My system is also running with two cards. After install the driver, my problem was a currupt IRQ installation inside the windows management.
Please make a sreen shot of your settings!
I think your problem comes from the IRQ settings in your hardware management.
You must install the driver for one time. Starting with the setup.exe!
When you configure your second card, you can use the same driver file inside of your system32. (*.inf)
My system is also running with two cards. After install the driver, my problem was a currupt IRQ installation inside the windows management.
Gruß Sven
Laser? Was ist das? Licht aus super erschwinglichen Restbeständen
Laser? Was ist das? Licht aus super erschwinglichen Restbeständen
-
canacasart
- Posts: 3
- Joined: Wed 10 Aug, 2005 7:40 pm
Who is online
Users browsing this forum: No registered users and 1 guest