M9024/widemove power supply question

Scanning, Scanner, Scannerspiegel, Scannerachsen, Torsionsstäbe und Treiberkarten.
Post Reply
absolute
Posts: 5
Joined: Sun 15 May, 2005 6:04 pm
Location: Netherlands

M9024/widemove power supply question

Post by absolute » Sat 27 Jan, 2007 12:17 pm

Hi all,

I just bought a set of M9024 second handed, but the power supply part is missing on the circuitboard.
Could someone specify the values for C1,2 C5 R60 and most of all which trafo to use? Primary it is 2*115V but how much should the secondary side be? 2*12V or 2*15V and how many VA is it.


Thanks in advance,

Abondi
Top
User avatar
fst-laser
Posts: 764
Joined: Sat 02 Jun, 2001 12:00 pm
Location: Gersthofen bei Augsburg

Post by fst-laser » Sat 27 Jan, 2007 12:32 pm

Hi Abondi,

C1,2 = 4700µF 25V
C5 = 100µF 25V
R60 = 10Ohm
Trafo: 2 x 115V ; 2 x 15V ; 30VA

This driver is designed from Jojo.

Flo
F S T Discohits, Laserrausch -
Laser Abheben in die Welt der Strahlen!

Suche einen Laser Physics - Reliant300WC Weißlichtlaser...
Top
absolute
Posts: 5
Joined: Sun 15 May, 2005 6:04 pm
Location: Netherlands

Post by absolute » Sat 27 Jan, 2007 12:46 pm

Hi Flo,

Thanks for the quick reply!
Time to go to the eletronic-parts store.

Abondi
Top
User avatar
da2001
Posts: 765
Joined: Tue 01 Apr, 2003 2:05 pm
Location: nähe Hamburg
Contact:
Contact da2001

Post by da2001 » Sat 27 Jan, 2007 1:39 pm

FST-Laser wrote: This driver is designed from Jojo.
Its sold by Jojo(jmlaser.com), but not designed.
Design was by Will Benner? Or who?
Top
User avatar
tschosef
Posts: 7955
Joined: Wed 19 Nov, 2003 10:27 am
Do you already have Laser-Equipment?: 7 Projektoren, Tarm Two und DS 2000
7 x ShowNET in einem Gehäuse incl Switch
zwei alte Eigenbaukisten liegen noch im Keller rum.
Location: Steinberg
Contact:
Contact tschosef

Post by tschosef » Sat 27 Jan, 2007 2:35 pm

Hai,

the Galvos are from JoJo
Schreibe nie etwas, was Du deinem Gegenüber nicht auch vor anderen Leuten ins Gesicht sagen würdest

Bin der Programmierer von Showeditor und HE-Laserscan
www.HE-Laserscan.de

Lasersoftware + Laserhardware
Top
User avatar
fst-laser
Posts: 764
Joined: Sat 02 Jun, 2001 12:00 pm
Location: Gersthofen bei Augsburg

Post by fst-laser » Sat 27 Jan, 2007 6:05 pm

@da2001:
Quote from the PCB: "(c) 1999 by MUELLER ELEKTRONIK".
My opinion is, that Joachim Müller is the designer (for the PCB :) ). Or is't it?

Greetings
Flo
F S T Discohits, Laserrausch -
Laser Abheben in die Welt der Strahlen!

Suche einen Laser Physics - Reliant300WC Weißlichtlaser...
Top
User avatar
da2001
Posts: 765
Joined: Tue 01 Apr, 2003 2:05 pm
Location: nähe Hamburg
Contact:
Contact da2001

Post by da2001 » Sat 27 Jan, 2007 6:09 pm

FST-Laser wrote:@da2001:
Quote from the PCB: "(c) 1999 by MUELLER ELEKTRONIK".
My opinion is, that Joachim Müller is the designer (for the PCB :) ). Or is't it?

Greetings
Flo
hm.. on my old widemoves was on the PCB "Mueller Elektronik" designed by Will Benner(?)..
Top
User avatar
fst-laser
Posts: 764
Joined: Sat 02 Jun, 2001 12:00 pm
Location: Gersthofen bei Augsburg

Post by fst-laser » Sat 27 Jan, 2007 6:25 pm

Will Benner or Bill Benner?
OK. I have read Bill Benner, the owner of Pangolin. Sorry.

Flo
F S T Discohits, Laserrausch -
Laser Abheben in die Welt der Strahlen!

Suche einen Laser Physics - Reliant300WC Weißlichtlaser...
Top
User avatar
jojo
Posts: 1939
Joined: Fri 21 Dec, 2001 12:00 pm
Do you already have Laser-Equipment?: -
Location: Germany
Contact:
Contact jojo

Post by jojo » Sun 28 Jan, 2007 2:29 pm

Bill Benner (= shortform for William) has once optimized the driver configuration for the Catweazle LCII (which is the same driver).
He has not routed the board - he helped us with the design.
For that reason, I placed his name on the board.

Joachim
Top
Post Reply

Return to “Scanner & Scannertreiber”

Who is online

Users browsing this forum: Semrush [Bot] and 1 guest