Riya USB Standalone?

Themen die mit Laser zu tun haben

Moderatoren: mikesupi, ChrissOnline

Antworten
Benutzeravatar
michael
Beiträge: 49
Registriert: Do 26 Feb, 2004 7:58 am
Wohnort: nähe Hannover

Riya USB Standalone?

Beitrag von michael » Mo 28 Mär, 2005 12:52 pm

Moin!


Hat jemand 'ne Ahnung, was bei der Riya-USB mit den zukĂĽnftigen Standalone-Eigenschaften gemeint ist?

Kann ich dann eine CF-Card reinstecken und ab geht die Show?
Oder soll das "nur" heissen, dass bei abgestürztem Computer die Bildausgabe weiterläuft...?



Michael

turntabledj
Beiträge: 2321
Registriert: Di 25 Dez, 2001 12:00 pm
Do you already have Laser-Equipment?: Selfmade 850mW RGB
Wohnort: DĂĽsseldorf / Germany
Kontaktdaten:

Beitrag von turntabledj » Mo 28 Mär, 2005 1:13 pm

Hi Michael,

diese CF-Card option hätte ursprünglich mal auf der Riya drauf sein sollen, allerdings haben die sich das irgendwie wieder anders überlegt.

Der Cardslot ist nicht bestĂĽckt und soweit ich weis, ist die Option auch zukĂĽnftig nicht mehr geplant.

Oder gibt es da mittlerweile wieder Neuigkeiten ?

Achim

Benutzeravatar
michael
Beiträge: 49
Registriert: Do 26 Feb, 2004 7:58 am
Wohnort: nähe Hannover

Beitrag von michael » Mo 28 Mär, 2005 1:19 pm

So lese ich das auf www.riyalasers.com jedenfalls raus...
Ich meine ĂĽbrigens nicht CF-Card sondern SmartMedia...


Michael

Benutzeravatar
riyalasers
Beiträge: 47
Registriert: Mo 07 Okt, 2002 12:00 pm
Wohnort: UKRAINE
Kontaktdaten:

Beitrag von riyalasers » Mi 30 Mär, 2005 11:11 pm

Hi Michael,

We stop development of SmartMedia card: we do not see interest for this production from our clients.

All the best
Ihor

Benutzeravatar
michael
Beiträge: 49
Registriert: Do 26 Feb, 2004 7:58 am
Wohnort: nähe Hannover

Beitrag von michael » Do 31 Mär, 2005 7:19 am

Hi Ihor!

Thanks for reply!

Then you should update your websites...


By the way: I'm interested! I want to use the RIYA-USB for commercial presentations. There is a "stand-alone-mode" a really feature!!!

@turbtabledj: Dann werde ich mir statt der Riya wohl den "made in Germany"-Nachbau für die Hälfte des Geldes kaufen. Der hat nur den fehlenden DMX-port als Nachteil... Und so glaube ich nur 8bit Farbe, was aber bei rein DPSS egal sein dürfte...Und er ist nackig! Gehäuse in der Größe habe ich genug hier...


Best regards
Michael

turntabledj
Beiträge: 2321
Registriert: Di 25 Dez, 2001 12:00 pm
Do you already have Laser-Equipment?: Selfmade 850mW RGB
Wohnort: DĂĽsseldorf / Germany
Kontaktdaten:

Beitrag von turntabledj » Do 31 Mär, 2005 11:11 am

Hi Ihor,

was it just me who told you that it would be a feature that it's nice to have - not more ?

During the development I was waiting about a message when the SM-Memory is supportet.
Just as I got the info, that SM will not be supportet by the USB-Controller I bougt it, cause it was the only one USB-device that was supportet by LDS at this time.
At the moment there are cheaper availiable...

Maybee a lot of Users would be glad if the RiyaUSB supports SM but not everyone told you...

Achim

Benutzeravatar
tschosef
Beiträge: 7952
Registriert: Mi 19 Nov, 2003 10:27 am
Do you already have Laser-Equipment?: 7 Projektoren, Tarm Two und DS 2000
7 x ShowNET in einem Gehäuse incl Switch
zwei alte Eigenbaukisten liegen noch im Keller rum.
Wohnort: Steinberg
Kontaktdaten:

Beitrag von tschosef » Do 31 Mär, 2005 11:16 am

Servus,

. Der hat nur den fehlenden DMX-port als Nachteil...
guckst Du hier:
viewtopic.php?p=50477#50477
gruĂź
Erich

Benutzeravatar
michael
Beiträge: 49
Registriert: Do 26 Feb, 2004 7:58 am
Wohnort: nähe Hannover

Beitrag von michael » Do 31 Mär, 2005 12:00 pm

Habe ich auch eben erst beim weitersurfen bemerkt... :oops:

Antworten

Zurück zu „Laserboard [de]“

Wer ist online?

Mitglieder in diesem Forum: Semrush [Bot] und 1 Gast