Daten Exiter 256

Betrieb, Bau und Modifikation von Gaslasern.

Moderator: mikesupi

Locked
bernd
Posts: 1227
Joined: Fri 28 Feb, 2003 9:35 pm
Location: Oberschleißheim @ München
Contact:
Contact bernd

Daten Exiter 256

Post by bernd » Thu 06 May, 2004 11:17 pm

Hallo Freaks,

hat jemand von euch die Daten eines Exiter 256 Netzteils für mich (Ausgangsspannung und -strom)?

Vielen Dank im Voraus Bernd
Top
User avatar
funkydoctor
Posts: 1556
Joined: Fri 01 Dec, 2000 12:00 pm
Do you already have Laser-Equipment?: Pangolin Pro and lots of lasers...about 700W optical output in total :-) ...and it's getting more every day...
Location: Lindlar / Köln
Contact:
Contact funkydoctor

Post by funkydoctor » Fri 07 May, 2004 12:15 am

Estimated specifications (SP-256):

Operating voltage: 4,500 V.
Operating current: 4.5 to 7.8 mA.
Starting voltage: 8,000 V.
Compliance range: 3,500 to 4,000 V at top of ballast resistor.

Hoffe das reicht...

Grüße,
Tobi
Top
bernd
Posts: 1227
Joined: Fri 28 Feb, 2003 9:35 pm
Location: Oberschleißheim @ München
Contact:
Contact bernd

Post by bernd » Fri 07 May, 2004 1:18 am

Hallo Tobias,

<<< Operating voltage: 4,500 V.
Compliance range: 3,500 to 4,000 V at top of ballast resistor.
Operating current: 4.5 to 7.8 mA. >>>

Hhhm - passt das nun zu meiner Röhre, die nach einem Netzteil mit
3200-4000 V
7.0 mA
schreit?

Scheint ja fast so... ODER?

Bernd
Top
User avatar
funkydoctor
Posts: 1556
Joined: Fri 01 Dec, 2000 12:00 pm
Do you already have Laser-Equipment?: Pangolin Pro and lots of lasers...about 700W optical output in total :-) ...and it's getting more every day...
Location: Lindlar / Köln
Contact:
Contact funkydoctor

Post by funkydoctor » Fri 07 May, 2004 1:47 am

Passt wie [zensiert] auf Eimer. :twisted:

Grüße,
Tobi
Top
Locked

Return to “Gaslaser”

Who is online

Users browsing this forum: No registered users and 0 guests