Achsdurchmesser GS 120 ?

Scanning, Scanner, Scannerspiegel, Scannerachsen, Torsionsstäbe und Treiberkarten.
Post Reply
User avatar
psycho
Posts: 108
Joined: Wed 02 Apr, 2003 10:19 am

Achsdurchmesser GS 120 ?

Post by psycho » Mon 03 Nov, 2003 4:27 pm

Hallo !
Weis hier zufällig jemand den Achdurchmesser von den GS120 ?
Oder hat jemand einen GS120 inkl. Meßschieber... ;o)

Danke!!

Tschau

Chris
"And in the end, it's not the years in your life that count. It's the life in your years."

tim
Posts: 184
Joined: Thu 11 Sep, 2003 2:33 pm
Location: Deutschlan/Bremen
Contact:

Re: Achsdurchmesser GS 120 ?

Post by tim » Mon 03 Nov, 2003 5:24 pm

Hey

Glaube es sind 4,7mm ......
Hatte mal von ThorstendB den Durchmesser mal beakommen.

Grüße, Tim

User avatar
lightfreak
Posts: 644
Joined: Tue 09 Oct, 2001 12:00 pm
Do you already have Laser-Equipment?: of course...
Location: Nitzahn
Contact:

Re: Achsdurchmesser GS 120 ?

Post by lightfreak » Mon 03 Nov, 2003 5:43 pm

Definitiv nicht!

4,7mm ist vielleicht bei G325
G120 sollte irgendwas um die 2,3 mm haben leider ist die Kopie des Datenblatts was ich habe sehr schlecht.

Gruß

Simon
----------------------------------------------------------------------------------
http://www.simon-light.de

User avatar
puenktchen
Posts: 235
Joined: Fri 21 Feb, 2003 11:34 am
Do you already have Laser-Equipment?: 1x RGB 1200mw
1x RGBBray 220mw
2x RGY 600mw
2x Easylase
LDS-Dynamics
Mamba-Black 2
Location: Bernau bei Berlin

Re: Achsdurchmesser GS 120 ?

Post by puenktchen » Mon 03 Nov, 2003 7:07 pm

hallo

mein messchieber sagt bei meinen G120D genau 2,2mm

gruss steffen
1x RGB-1200mW Raytrack35+
2x RGB-900mW G120D
1x MiniRGB-500mW PT40K
2x Swisslas PM 1200
7x Easylase2, M3, Dynamics

User avatar
psycho
Posts: 108
Joined: Wed 02 Apr, 2003 10:19 am

Re: Achsdurchmesser GS 120 ?

Post by psycho » Tue 04 Nov, 2003 8:50 am

Danke !
Tschau
Chris
"And in the end, it's not the years in your life that count. It's the life in your years."

Post Reply

Return to “Scanner & Scannertreiber”

Who is online

Users browsing this forum: No registered users and 2 guests