HeNe Leistung und Netzgeräte

[netdiver]

Wer kann mir sagen, mit welchem Netzgerät (Ausgangsspannung usw.) man welche HeNe Röhren betreiben kann. Gibt es da irgendwelche Faustregeln ?<P>Grüße,<P>Netdiver

[marc]

habe folgenden abschnitt in sam's faq gefunden vielleicht hilft er dir weiter....<BR>.<BR>Basic HeNe Laser Power Supply Considerations<P>Modern small to medium size HeNe tubes require an operating voltage between about 900 and 2,500 VDC at 3 to 6 mA and a 5 to 12 kV starting voltage (but<BR>almost no current). Precise values depend on the size and construction of the tube. This assumes something in the .5 to 10 mW range. Larger tubes will required<BR>greater voltage and current (e.g., 5,000 VDC at 8 mA, 15 kV to start) but are powered in basically the same way as their smaller siblings. However, a 250 mW<BR>monster as well as some very old tubes will likely have significantly different or additional power requirements.<P>du findest noch mehr zu diesem thema unter "HeNe Laser Power Supplies"<P>cu marc