LASERVER

Betrieb, Bau und Modifikation von Festkörper- und Diodenlasern (keine Pointer)
Antworten
deejay_bamse
Beiträge: 13
Registriert: Mo 30 Jul, 2007 8:54 am

LASERVER

Beitrag von deejay_bamse » Mo 10 Mär, 2008 10:30 am

Hello... I hope that Your dont getting angry for writing in English here...
Nobody looks in the English part of the forum...

I have a question..
I bought som DPSS lasers from LASEVER...
And I have som problems with my red laser... I have written to David at Lasever and he dont replys...
Have anyone mor bought from them and had any problems with getting in contact with them after??
Im willing to pay for them to look at the diod but he doesnt answer...
Newbie... So what?
It lights my fire.......

Benutzeravatar
nohoe
Beiträge: 3969
Registriert: Mo 20 Feb, 2006 1:09 pm
Do you already have Laser-Equipment?: 9x RGB LASER
6 x Netlase(5 x LC) + 1x EL LC
Software: Dynamics + + Beyond
HE und sonstige
Wohnort: 44795 Bochum
Kontaktdaten:

Beitrag von nohoe » Mo 10 Mär, 2008 12:06 pm

Hello

If you are able to read German please look here for further informations about Lasever:

viewtopic.php?t=42941&highlight=lasever

or

viewtopic.php?t=40878&highlight=lasever

Greetings
Norbert :)
http://www.nohoe.de/gallerie
RGB 4 Watt OPT Laser RGB mit CT6800 + 2 LIGHSPACE 3 Watt Pure Diode PT40K
+ 2x RGB 1 Watt Pure Diode Litracks+ 4 x RGB 1.8 Watt Pure Diode PT40K
Software Dynamics und Beyond

Benutzeravatar
decix
Beiträge: 1507
Registriert: So 30 Jul, 2006 11:56 am
Do you already have Laser-Equipment?:  nicht mehr, vielleicht irgendwann wieder

Beitrag von decix » Mo 10 Mär, 2008 3:37 pm

Well Deejay, if you do not get an answer there's not much you can do ;-)
Try again and again...
For Lasever-Discussion you might take a look here too.
Especially the blue ones had some problems in the past.
My green one (200mW) has problems when modulated (Picture)
(The wandering dark areas within the green beams should not be there.)
Tried a different driver, but no result.
Gotta live with that until replacement is affordable.

deejay_bamse
Beiträge: 13
Registriert: Mo 30 Jul, 2007 8:54 am

Beitrag von deejay_bamse » Mo 10 Mär, 2008 7:54 pm

Im very pleased with the lasers. The Only problem I have is the Red 250mW one is much darker than the Blue 80mW and Green 150mW... And I mean MUCH darker....
I talked to David @ Lasever and I said that I could pay for all if he just could check it for me... And he just stopped answer my mail...
I havent used it more then when I build my box....
And now its almost 1.5month since he last answer a mail...
Newbie... So what?
It lights my fire.......

Antworten

Zurück zu „Dioden- & Festkörperlaser“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 0 Gäste