DMX out

Alles rund um Lasershow Designer 2000 und Tools.

Moderators: decix, thomas

Post Reply
vts
Posts: 88
Joined: Sat 06 Oct, 2001 12:00 pm
Location: Duisburg

DMX out

Post by vts » Sun 30 Dec, 2001 1:04 am

Gibt`s hier jemanden der schon mal Probleme mit dem DMX Ausgang hatte?????
In Form das ein anderes Gerät(Booster) plötzlich nich mehr funzt??? Oder die Karte kein DMX mehr rausgibt????????
Gruß und rutsch
TS

thomas
Posts: 827
Joined: Mon 20 Nov, 2000 12:00 pm
Location: Berlin
Contact:

Re: DMX out

Post by thomas » Sun 30 Dec, 2001 1:42 pm

Wenn's erstmal funktioniert hat eigentlich nicht.

Gruß.

patrick
Posts: 505
Joined: Sat 11 Nov, 2000 12:00 pm

Re: DMX out

Post by patrick » Tue 01 Jan, 2002 3:59 pm

Thorsten,

ich würde mal Deine DMX-Parameter Einstellungen überprüfen, insbesondere "enable output" und "dmx time values".

Patrick

vts
Posts: 88
Joined: Sat 06 Oct, 2001 12:00 pm
Location: Duisburg

Re: DMX out

Post by vts » Wed 02 Jan, 2002 9:15 pm

@ Patrick

Mein DMX out ist schon O.K.
Habe einen Opto Booster dazwischen gehängt ( ganz neu) und der ist nach ein paar Stunden abgeraucht.
Beim Kollegen kommt nachdem er einen Dimmer angeschlossen hat nix mehr.
Dachte es gibt vieleicht ein generelles problem.

Nungut
Frohes neues TS

patrick
Posts: 505
Joined: Sat 11 Nov, 2000 12:00 pm

Re: DMX out

Post by patrick » Thu 03 Jan, 2002 10:40 am

@TS: Liegt vermutlich eher an Deinem Booster.

Patrick

User avatar
pangolinlaser
Posts: 156
Joined: Mon 12 Nov, 2001 12:00 pm
Location: Orlando, FL USA
Contact:

Re: DMX out

Post by pangolinlaser » Mon 07 Jan, 2002 11:19 am

Hello there,

If you are having problems with DMX, please refer to the DMX troubleshooting sections of the help file and our web site. DMX problems might be caused by the output settings being set incorrectly or perhaps termination. Termination is something that is overlooked a lot, and becomes increasingly more important with long cable runs.

Best regards,

William Benner
Pangolin Laser Systems

Post Reply

Return to “Pangolin Lasershow Designer & Tools”

Who is online

Users browsing this forum: No registered users and 1 guest