Hallo Maik
An den Monsoon Laserbarren (resp. dem ganzen Array) habe ich grosses Interesse!
Auserdem hätte ich dir ggf. einen Kontakt, welcher dir minidistens eines der Netzteile abkaufen würde.
Falls die Distanz für Ihn nicht zu gross ist (wir sind in der Schweiz).
Bitte PN.
Danke
Diodentyp in horizontalem Array?
Re: Diodentyp in horizontalem Array?
Hello
I bought NWl LASER MISTRAL-COMPACT.
Data from the rating plate:
GERATETYP: MISTRAL-COMPACT
GERATEART: SCHUTZKLASSE 1
SERIEN-NR: 04/98-006-C
STROM: 10A
KUHLUNG: LUFT
LASER: Nd-YAG
FERTIGUNG: APRIL 1998
I have big problems because i don't have control computer.
I send in annex picture of plugins.
Maybe someone have any documentations or information, where i can buy this control computer or control elements?
I waiting to yours help.
Best Regards
Adam
I bought NWl LASER MISTRAL-COMPACT.
Data from the rating plate:
GERATETYP: MISTRAL-COMPACT
GERATEART: SCHUTZKLASSE 1
SERIEN-NR: 04/98-006-C
STROM: 10A
KUHLUNG: LUFT
LASER: Nd-YAG
FERTIGUNG: APRIL 1998
I have big problems because i don't have control computer.
I send in annex picture of plugins.
Maybe someone have any documentations or information, where i can buy this control computer or control elements?
I waiting to yours help.
Best Regards
Adam
-
Death
- Posts: 1068
- Joined: Sun 01 Dec, 2013 10:16 pm
- Do you already have Laser-Equipment?: CO² Laser
YAG Laser
Dioden Laser - Location: Duisburg
Re: Diodentyp in horizontalem Array?
Hi Adam,
this laser is a diode-pumped ND: YAG with a small compressor cooling.
It is usually a stand alone system or an integrated assembly line system.
My experience with such old devices is that you cannot get spare parts, documents only with luck if you ask companies that repair them.
Or you wait a very long time until you get parts for it on Ebay or other platforms for good money.
Most manufacturers like NWL ( now Photon Energy ) or other manufacturers like this usually give you the answer: no support, obsolvent because it's too old.
I usually only see a chance to get the power supply that supplies the diodes controllable.
This is usually possible with a 0-10V signal and additional INHIBIT to switch off. You then control the frequency for the ND: YAG with the Q-Switch. Here you have to see whether you can use the existing Q-Switch with driver or whether you have to convert.
Or, if you don't want to convert anything, try to get another laser of this type, hoping it's complete.
Best Regards
Michael
this laser is a diode-pumped ND: YAG with a small compressor cooling.
It is usually a stand alone system or an integrated assembly line system.
My experience with such old devices is that you cannot get spare parts, documents only with luck if you ask companies that repair them.
Or you wait a very long time until you get parts for it on Ebay or other platforms for good money.
Most manufacturers like NWL ( now Photon Energy ) or other manufacturers like this usually give you the answer: no support, obsolvent because it's too old.
I usually only see a chance to get the power supply that supplies the diodes controllable.
This is usually possible with a 0-10V signal and additional INHIBIT to switch off. You then control the frequency for the ND: YAG with the Q-Switch. Here you have to see whether you can use the existing Q-Switch with driver or whether you have to convert.
Or, if you don't want to convert anything, try to get another laser of this type, hoping it's complete.
Best Regards
Michael
Re: Diodentyp in horizontalem Array?
Dear Michael
I think you don't understamd me.
I have controler diode but i haven't computer who i control this machine.
In annex i send you picture of plugins.
I have working machine but can't do anything because i don;t have control PC.
Maybe do you have any information where i can buy this elements or documentation.
Best Regards
Adam
I think you don't understamd me.
I have controler diode but i haven't computer who i control this machine.
In annex i send you picture of plugins.
I have working machine but can't do anything because i don;t have control PC.
Maybe do you have any information where i can buy this elements or documentation.
Best Regards
Adam
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 3 guests