LaserFreak Forum
SPI laser's manual, anyone ?
SPI laser's manual, anyone ?
Hello,
I got an SPI fiber laser (50W, GEN4, SP 050 A-RM-Z)) but manual is missing...
Trumpf, which is the new owner of SPI, doesn't seem to be really aware of those lasers. The SPI website keeps asking for a password but never send a link to register ... I can't fire it up !
Does anyone know these lasers or have a manual so I can power on (I don't know the signals required by the interface board) ?
Thanks a lot !
Greatings,
Fabrice
I got an SPI fiber laser (50W, GEN4, SP 050 A-RM-Z)) but manual is missing...
Trumpf, which is the new owner of SPI, doesn't seem to be really aware of those lasers. The SPI website keeps asking for a password but never send a link to register ... I can't fire it up !
Does anyone know these lasers or have a manual so I can power on (I don't know the signals required by the interface board) ?
Thanks a lot !
Greatings,
Fabrice
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Re: SPI laser's manual, anyone ?
Hello,
I've tried ... several time !
But I enter in a loop which says:
- register
- follow the link send to your email
--- I never get that link so I register again ...
- you can't use that username or that email, already taken
---- I tried to reset the password but it say that the email is not recognised
---- when I ask for the username, it sends me the username to my email without problem !
I hate that kind of Kafka's story ...
So I called Trumpf in France ... several months later I'm still at the same place. The only person who answer and works correctly is the secretary !
Too bad, she doesn't have that fuc... manual !
I've tried ... several time !
But I enter in a loop which says:
- register
- follow the link send to your email
--- I never get that link so I register again ...
- you can't use that username or that email, already taken
---- I tried to reset the password but it say that the email is not recognised
---- when I ask for the username, it sends me the username to my email without problem !
I hate that kind of Kafka's story ...
So I called Trumpf in France ... several months later I'm still at the same place. The only person who answer and works correctly is the secretary !
Too bad, she doesn't have that fuc... manual !
-
- Beiträge: 117
- Registriert: Sa 03 Apr, 2010 3:50 pm
- Do you already have Laser-Equipment?: - Eigenbau Laserbeschrifter mit 120W/1072nm IPG Faserlaser, GSI-Lumonics Galvokopf und chinesischer LMC/EzCAD Karte.
- Eigenbau Laserbeschrifter mit 50W Synrad CO2-Laser, Raylase Galvokopf und chinesischer LMC/EzCAD Karte.
-Rofin-Sinar 103D Laserbeschrifter mit Spectra Physics T20 diodengepumptem Q-Switched YAG
- Photonix DCH-355-3 (3W, 355nm)
- Rofin PowerLine Pico 1064nm mit VLM
- 40mW/488nm Argon Ionenlaser mit linearem Eigenbaunetzteil
- 30mW/632.8nm Open Frame HeNe
- 5 mW NEC HeNe (lin. pol). für Holographie
- 1mW HeNe grün
- div. kleine HeNe und Diodenlaser
Re: SPI laser's manual, anyone ?
Ich hätte ein 'G4 Pulsed Fibre Laser V8 Interface Manual', vielleicht passt das. Bei Interesse per email.
Gruß
Uli
Gruß
Uli
Re: SPI laser's manual, anyone ?
Hallo Uli,
Ich habe endlich eine Antwort von Trumpf bekommen: mein SPI-Laser wird in einen TruPulse 2005 nano umbenannt!
Sie haben mir eine Äquivalenztabelle zusammen mit anderen Dokumenten geschickt.
Vielen Dank für Deine Hilfe !
Fab
--------------------------------
Hello Uli,
I finally got an answer from Trumpf : my SPI laser is rebranded as a TruPulse 2005 !
They sent me an equivalence chart along with other docs.
Thanks for your help !
Fab
Ich habe endlich eine Antwort von Trumpf bekommen: mein SPI-Laser wird in einen TruPulse 2005 nano umbenannt!
Sie haben mir eine Äquivalenztabelle zusammen mit anderen Dokumenten geschickt.
Vielen Dank für Deine Hilfe !
Fab
--------------------------------
Hello Uli,
I finally got an answer from Trumpf : my SPI laser is rebranded as a TruPulse 2005 !
They sent me an equivalence chart along with other docs.
Thanks for your help !
Fab
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste