Diodentyp in horizontalem Array?

CW und Q-switched, ordentlicher Ir, sichtbarer oder UV Rums der Spaß macht, sowie Materialbearbeitung mit diesen Lasern.
Benutzeravatar
Bändäl
Beiträge: 14
Registriert: So 27 Jan, 2019 3:59 pm
Do you already have Laser-Equipment?: LPS X-Beam 500RGB/Laserworld CS-1000RGB
Nd:YAG,diodengepumpt,gütegeschaltet 0–100 kHz, 8–60 W CW, Pulsspitzenleistung 200 kW
Wohnort: CH

Re: Diodentyp in horizontalem Array?

Beitrag von Bändäl » So 03 Nov, 2019 12:38 pm

Hallo Maik

An den Monsoon Laserbarren (resp. dem ganzen Array) habe ich grosses Interesse!
Auserdem hätte ich dir ggf. einen Kontakt, welcher dir minidistens eines der Netzteile abkaufen würde.
Falls die Distanz für Ihn nicht zu gross ist (wir sind in der Schweiz).
Bitte PN.

Danke

bigolo67
Beiträge: 2
Registriert: So 05 Jan, 2020 1:15 am
Do you already have Laser-Equipment?: YES

Re: Diodentyp in horizontalem Array?

Beitrag von bigolo67 » Di 07 Jan, 2020 2:32 pm

Hello
I bought NWl LASER MISTRAL-COMPACT.
Data from the rating plate:
GERATETYP: MISTRAL-COMPACT
GERATEART: SCHUTZKLASSE 1
SERIEN-NR: 04/98-006-C
STROM: 10A
KUHLUNG: LUFT
LASER: Nd-YAG
FERTIGUNG: APRIL 1998

I have big problems because i don't have control computer.
I send in annex picture of plugins.
Maybe someone have any documentations or information, where i can buy this control computer or control elements?
I waiting to yours help.
Best Regards
Adam

Death
Beiträge: 528
Registriert: So 01 Dez, 2013 10:16 pm
Do you already have Laser-Equipment?: CO² Laser
YAG Laser
Dioden Laser
Wohnort: Duisburg

Re: Diodentyp in horizontalem Array?

Beitrag von Death » Di 07 Jan, 2020 8:32 pm

Hi Adam,

this laser is a diode-pumped ND: YAG with a small compressor cooling.

It is usually a stand alone system or an integrated assembly line system.

My experience with such old devices is that you cannot get spare parts, documents only with luck if you ask companies that repair them.

Or you wait a very long time until you get parts for it on Ebay or other platforms for good money.

Most manufacturers like NWL ( now Photon Energy ) or other manufacturers like this usually give you the answer: no support, obsolvent because it's too old.

I usually only see a chance to get the power supply that supplies the diodes controllable.

This is usually possible with a 0-10V signal and additional INHIBIT to switch off. You then control the frequency for the ND: YAG with the Q-Switch. Here you have to see whether you can use the existing Q-Switch with driver or whether you have to convert.

Or, if you don't want to convert anything, try to get another laser of this type, hoping it's complete.

Best Regards

Michael

bigolo67
Beiträge: 2
Registriert: So 05 Jan, 2020 1:15 am
Do you already have Laser-Equipment?: YES

Re: Diodentyp in horizontalem Array?

Beitrag von bigolo67 » Mo 13 Jan, 2020 1:12 pm

Dear Michael

I think you don't understamd me.
I have controler diode but i haven't computer who i control this machine.
In annex i send you picture of plugins.
I have working machine but can't do anything because i don;t have control PC.
Maybe do you have any information where i can buy this elements or documentation.
Best Regards
Adam
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.

Antworten

Zurück zu „High Power Laser & Materialbearbeitung“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast