LaserFreak Forum
I need help
I need help
I'm doing a science fair and I told my teach. that I was going to build a hologram but I don't know how to build one. I need simple instructions on how to build one.
please help
-Buggy
please help
-Buggy
Hey Buggy, first i hope you can forgive me for my bad English!
Our forum got an English section you can Post there!
index.php?c=16
greetz Henrik
Our forum got an English section you can Post there!
index.php?c=16
greetz Henrik
Ich bin nicht die Signatur ich bin nur der Hausmeister.
- floh
- Beiträge: 2406
- Registriert: Mo 04 Feb, 2002 12:00 pm
- Do you already have Laser-Equipment?: Lexel 88, Compass 315, diverse HeNe und eine Menge Kleinkram.
- Wohnort: Ostschweiz
- Kontaktdaten:
Hello buggy
i do holography for about 3 years. I'm not the best but i did some nice holograms.
you can find my page here: www.hologramm.ch.vu
it is in german so you probably need a translator like google or altavista. look at the pictures in the gallery section, the first pictures are simple holography.
for the first beginning you need:
-a HeNe laser about 5-10mW, TEM00, polarized if possible (or a diode but there are only a few good diodes for holography)
-a lens or microscope objective to expand the beam
-two glass plates to hold the film
-a solid table
-holography film like Slavich PFG-01 or similar
-Developper from the photo store. I use Dokumol from Tetenal
-Bleach (there are some different receipts)
-a dark green safety light
and some boxes for developping, an object, and lot of time.
and my last hint: here are the english speaking holographers: http://holographyforum.org/
maybe one of them lives near to you and can help.
i do holography for about 3 years. I'm not the best but i did some nice holograms.
you can find my page here: www.hologramm.ch.vu
it is in german so you probably need a translator like google or altavista. look at the pictures in the gallery section, the first pictures are simple holography.
for the first beginning you need:
-a HeNe laser about 5-10mW, TEM00, polarized if possible (or a diode but there are only a few good diodes for holography)
-a lens or microscope objective to expand the beam
-two glass plates to hold the film
-a solid table
-holography film like Slavich PFG-01 or similar
-Developper from the photo store. I use Dokumol from Tetenal
-Bleach (there are some different receipts)
-a dark green safety light
and some boxes for developping, an object, and lot of time.
and my last hint: here are the english speaking holographers: http://holographyforum.org/
maybe one of them lives near to you and can help.
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast