ok thanks

johan.

is there eneyone who can tell me what the operating voltage and current is of the laserdiode in a 45mW dreamlaser module.

dammmm, i hoped sins there was still red light emmitting, that the diode was still ok.

sorry, i don't speak french.
only dutch and english

do you have any idea what i can do abaud it?

thanx for your response

hi, i have a 35mW dpss module from "dream lasers" but, not knowing that there was a positive voltage on the housing of the lasermodule, i connected the module to am metal housing an gone was the output. in an attempt to repair the unit, i messured + 2V and 0.5A and if i look into the diode ( i know ...

damm, i so hoped to have a 0.5W laser. but thanks for your response

hi, i have green dpss module from "dreamlasers.com". the module is rated 35mW but the diode says "max 0,5w @ 500mA". is it possible to tune this diode ( and extra cooling) to 0,5w

i think that the driver can handle 500mA but can the diode do this, and what will do this regarding the life time of ...

hi, when cleaning up a basement of a old discotheck, i found a "colorray 2", a laser moving head from lasermedia. the only thing i know, i that it is a fibre coupled device and it hase an RS232 port.
i there aneyone who knows this device or maybi knows where i could find some info on how to use it ...

ps: i mean 120-200m in normal day light

hi,

i want to attach pointer to a V-dosk speaker to point in te direction where the speaker is playing. this to be able to aimc the speaker.
no i don't have any idee of how much power(mw) it should be. it should be able to see a point at a distance of 120-200m.


thanks
ps: i hope someone can ...

hi, i am using lds for a while now an sinds a few day i can't use the lascad soft anymore, when i start lascad, the software loads but no window is vissible, the program appears in the tool bar, when i try to close the program the software asks me if i want to save the show so the program must be ...

hi
can you send me the circuit to, i have to same problem, 2 x g325 but no driver

hi,
i wonder if it is possible to sync 2 pc's to 1 media file

i have one pc with lds and an other pc with dmx software i want to make a show with sound light and laser.
is it possible to use lds as master ( starts the show an stop ...)to control the show and when the show starts, the other pc ...

hi,

i have a 37mw green dpss laser, but the driver only has ttl modulation, i want to know if is possible to make a new driver or change the orriginal driver to have analog modulation. or can i just change the input voltage of the driver.

hi,
is it possible to take a par 36 sealed beam lamp and a few lenses to bundle the light into a beam of + 3mm to create a cheap "fake" laser effect? how can it be done

thanks for all the response

Hi,
i am new to galvo drivers and i hope someone can help me.
i have 2x g120 and amp3 (galvo amp from lobo) .i want to know where the "AGC" connectionis fore. is there aneyone who knows where its fore and what it's value should be???

hi, i am from belgium, and it seems to be a dead place for lasershows and leser events.
are there people from belgium here and is there someone who can tell me where it's all happening here in belgium?

whel eeuh the problem is, ... i have no scope . i orderd one but he has not arrived yet.

if it's of any use, i have a shematic of the driver

obviously the ramp generator on the driver of the g120.
i have tried with speed at minimum, gain at minimmum, damping at minimum,
but when i change damping, then nothing hapens

sorry forgot the attachement

i have a lobo close loop amp3 with 2 x g120 and i think he is broken
when i adjust the damping, nothing hapens. when i adjust int. gain, nothing hapens, i have a lot of overshoot and i dont know where to start looking to fix the problem. can someone help me please??????????

in attachement you fnd ...

i have an amp3 from lobo and a g120. when i draw a picture (ilda test patern) then, the only thing i see are overshoots. if i adjust the dampening, then nothing happens. is there something broken or just "de tuned" ? if i messure the volt on the pin 8 and 13 ( Oscillator supply voltage) then i have ...

hat iemand eine handbuch von die amp3 galvo trieber von lobo?