G120dt Anschluss
Posted: Thu 22 Jun, 2017 10:15 am
Hallo hat jemand die Belegung des 15 poligen Steckers zur Hand?
denke das müsste es sein:
1. Drive Coil RED
2. Drive Coil Yellow
3. Position output (-)
4. Position Output (Common)
5. Heater Blanket (low)
6. N/C
7. Heater Blanket (high +15V)
8. Oscillator Supply Voltage (+)
9. Drive Coil Green
10. Drive Coil Black
11. Position Output (+)
12. AGC Output
13. Oscillator Supply Voltage (Common)
14. N/C
15. Thermistor
