[Biete] Arctos Fortiss 6,5 W RGB
Posted: Fri 01 Jul, 2011 11:33 am
Hallo,
Fals einer ernsthaftes Interesse an meinem Arctos Fortiss 6,5W RGB
hat kann er sich bei mir per PM melden.
(Oder wenn er einen kennt)
Technische Daten:
Rot 1,5 W (640nm)
Grün 3,0 W (532nm)
Blau 2,0 W (445nm)
Scanner: CT6800, 1M0 CT Servoamp, incl. scanner safety
Beam parameters: <3,0mm; 0,8mrad (full angle) divergence
System power consumption: 110-230VAC@ 1,5KW
Modulation-frequency: up to 30 kHz analog input: 0-5V
Operating-t°: <8C° to 30C°; optimal operational t°: 25C°
T°-controlled: heating and cooling for optimal laser parameters & stability
ILDA Standard: D-Sub 25p
Scanner CT 6800 up to 60kpps depend. on scan-angle and frame. (up to 30kpps@54° full angle)
Alter: 1 Jahr und 3 Monate
Stunden ca. 150h
Zubehör:
Penthous Edition (Gratin Box)
Remote Controle (NotAus) inkl. 30M Kabel
Amtown Flightcase Prof. Version
Bei fragen bitte einfach melden.
Weitere Daten:
http://www.arctoslaser.de/en/files/lass ... ortis_data
PS: Ich bitte von Diskusionen abzusehen, am liebsten würde ich einen Mod bitten den Beitrag zu schließen.
Fals einer ernsthaftes Interesse an meinem Arctos Fortiss 6,5W RGB
hat kann er sich bei mir per PM melden.
(Oder wenn er einen kennt)
Technische Daten:
Rot 1,5 W (640nm)
Grün 3,0 W (532nm)
Blau 2,0 W (445nm)
Scanner: CT6800, 1M0 CT Servoamp, incl. scanner safety
Beam parameters: <3,0mm; 0,8mrad (full angle) divergence
System power consumption: 110-230VAC@ 1,5KW
Modulation-frequency: up to 30 kHz analog input: 0-5V
Operating-t°: <8C° to 30C°; optimal operational t°: 25C°
T°-controlled: heating and cooling for optimal laser parameters & stability
ILDA Standard: D-Sub 25p
Scanner CT 6800 up to 60kpps depend. on scan-angle and frame. (up to 30kpps@54° full angle)
Alter: 1 Jahr und 3 Monate
Stunden ca. 150h
Zubehör:
Penthous Edition (Gratin Box)
Remote Controle (NotAus) inkl. 30M Kabel
Amtown Flightcase Prof. Version
Bei fragen bitte einfach melden.
Weitere Daten:
http://www.arctoslaser.de/en/files/lass ... ortis_data
PS: Ich bitte von Diskusionen abzusehen, am liebsten würde ich einen Mod bitten den Beitrag zu schließen.