www.LaserFreak.net

Wieviel Wasserdruck erlauben Laserköpfe wenn z.B. jemand auf den Ablauf latscht .

z.B. Lexel 88 ,Spinnaker 1161

Gruß Gento

Moiin Rainer,

bin gerade zu faul Spectradatenbuch zu suchen (bin eh gerade auf der Arbeit), aber Lexel-website ist ja wieder online
Daher ein schneller Blick zum lexel 85 und 95, der 88 sollte da ja ähnlich sein:

Cooling water pressure 70 psi (4.8 Atm) max

siehe auch: http://www.lexellaser.com/laser_8595-specs.htm

gruss gunnaR aka. xbill

LEXEL 85/95 SERIES - OPERATIONAL AND DIMENSIONAL
(detailed specifications)


Version
85
95
95L
Optical resonator Solid Invar® rod structure
Electrical service requirements 220 VAC
Single phase
50/60 Hz 208 VAC
3-phase Wye or Delta
50/60 Hz
Maximum current draw 30A 35A 50A
Input voltage range 190-245 V (Argon)
195-240 V (Krypton) 190-235 V
Cooling water flow 1.5 gpm at 15 psi
(5.6 liters/min at 1 Atm) 2.0 gpm at 20 psi
(7.5 liters/min at 1.4 Atm)
Cooling water source Filtered tap water
Incoming water temperature 50-90° F (10-35° C)
Non-condensing environment
Cooling water pressure 70 psi (4.8 Atm) max
Laser head, length
Click here for dimensional drawing 34.3 in
(87.2 cm) 41.5 in
(105.4 cm) 50.0 in
(127.0 cm)
Laser head, width/height 7.2 x 5.7 in (18.2 x 14.3 cm)
Laser head, uncrated weight 50 lb (23 kg) 62 lb (28 kg) 77 lb (35 kg)
Laser head, crated weight 91 lb (41 kg) 103 lb (47 kg) 118 lb (54 kg)
Power supply, depth/width/height 18.0 x 19.6 x 8.0 in
(45.7 x 49.8 x 20.3 cm) 19.3 x 20.1 x 10.8 in
(48.9 x 51.1 x 27.4 cm)
Power supply, uncrated weight 82 lb (37 kg) 125 lb (57 kg)
Power supply, crated weight 104 lb (47 kg) 144 lb (65 kg)
Specifications as of 5/2003. Subject to change without notice.


Click here to return to the main Lexel 85/95 page

The Lexel 85/95 series lasers produce a variety of wavelengths with very high quality beams.



Info on this page:
Wavelength and Power
Beam Parameters
Operational and Dimensional

Info on other pages: