TTL mod to analog modulation

Betrieb, Bau und Modifikation von Netzteilen.
Antworten
zysiu
Beiträge: 4
Registriert: Di 29 Nov, 2005 12:15 am
Wohnort: Koszalin, Poland
Kontaktdaten:

TTL mod to analog modulation

Beitrag von zysiu » Di 29 Nov, 2005 9:58 pm

Hello,
sorry I don't speak German.
I have a small question: Is it possible to change TTL modulation on DPSS 532nm to Analog modulation without using AOM?
If this is workable could You give me some advice ?

Thx

Benutzeravatar
nordlicht
Beiträge: 302
Registriert: Mi 31 Mär, 2004 9:33 pm
Wohnort: Hamburg

Re: TTL mod to analog modulation

Beitrag von nordlicht » Mi 30 Nov, 2005 12:21 pm

Hello

It is possible to modify the driver of your laser. Please show us your laser by posting a photo or give us an information about the model and type. For several models it is very easy to change to analog modulation, you can upgrade the driver. And some freaks have developed their own diode drivers, maybe it is possible to use these drivers. But we need to know more about your laser.

Greets from Hamburg

Michael

zysiu
Beiträge: 4
Registriert: Di 29 Nov, 2005 12:15 am
Wohnort: Koszalin, Poland
Kontaktdaten:

Beitrag von zysiu » Mi 30 Nov, 2005 8:31 pm

Hello Michael and Others freaks

My laser is made in China :( and I don't know the model. It is from disassembled very cheap disco laser scanner. The Power is quite good, about 60-70mW. I redraw circuit of power supply from PCB. You can see it below: Two others pictures are view of PCB.
As you can see the Laser Blanking is made on Q4 transistor. I think the Analog Blanking could be made on U4, because VR1 regulate current for laser diode.
Maybe someone has any idea? Or ready-made circuit because I don't have to use oryginal supply.

Best regards,
Peter from Poland
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.

housedeejay
Beiträge: 6
Registriert: Mo 04 Feb, 2008 8:06 pm
Wohnort: Poland ,Warsaw

Re: TTL mod to analog modulation

Beitrag von housedeejay » So 23 Mai, 2010 11:22 am

Hello Zysiu.

I think that modificated "Roithner EU - 38" should be nice for You... ;)
This driver has a maximal current about 1,2 A so it will be fine/...I gues.

Sorry for My weak english... ;)

HouseDeeJay

stoppi
Beiträge: 225
Registriert: Fr 17 Feb, 2006 11:33 am
Wohnort: Graz, Austria

Re: TTL mod to analog modulation

Beitrag von stoppi » So 23 Mai, 2010 5:58 pm

Hello!

The united states have tested a new type of bomb, called nuclear bomb. Few days earlier hannibal had crossed the alps....

When you stay logged in I will edit the latest news, with best wishes Up_to_date_stoppi :lol: :lol:
Der größte Idiot kann mehr Fragen stellen als der Schlaueste je zu beantworten vermag.

Benutzeravatar
tracky
Beiträge: 4574
Registriert: Di 11 Mär, 2003 1:51 pm
Do you already have Laser-Equipment?: RGB Projektor mit 2W 445nm, 1W 520nm, 1W 658nm Swisslas, Raytrack 30, Gento Safety für Grafik Shows
2x Venus 1800 RGB
2x Venus 3 RGB
2x Eigenbau a 2W
DAC Server mit Netlas Karten, Notaus, DMX uvm.....
Akai APC40, Midi Keyboard for Live
Beam Table 2000 - Grating Box und Scanner Einheit, Audio gesteuert
Wohnort: Germany, Seefeld bei Werneuchen
Kontaktdaten:

Re: TTL mod to analog modulation

Beitrag von tracky » Mo 24 Mai, 2010 8:25 pm

Hi, forget this driver. He is very dangerous because you have full 230V on the PCB. This typ of driver is one of the cheapest that I know. Sorry also the DPSS is only a "bigger" laser pointer! Not temperature regulated, cheapest laser diodes and very small Casix crystal for a maximum of 100mW when you try a 1W laser diode. In this case your laser diode have a maximum of 500mW and runs on current maximum. Normaly this laser have a very small live time! That's the reason for higher price and better quality of some other manufacturer . . .
Gruß Sven

Laser? Was ist das? Licht aus super erschwinglichen Restbeständen

LEE PEI SAN
Beiträge: 1
Registriert: Di 17 Apr, 2012 4:07 am
Do you already have Laser-Equipment?: laser diode circuit, zener diode

Re: TTL mod to analog modulation

Beitrag von LEE PEI SAN » Di 17 Apr, 2012 4:24 am

sorry.. im confusing with the zener diode in this circuit now.. so may i know the type of Zener diode (ZD3) using in this circuit ? thank you
im a kinda urgent with this.. thank you :)

goamarty
Beiträge: 1488
Registriert: Fr 05 Sep, 2008 10:15 am
Do you already have Laser-Equipment?: 190mW RGY + einige Module
Wohnort: Wien

Re: TTL mod to analog modulation

Beitrag von goamarty » Di 17 Apr, 2012 9:08 am

I dont see the sense of this ZD3 at all, as the voltage is already regulated bevor this transistor. I would not build this driver, as it looks a little clumsy. :-)

Antworten

Zurück zu „Netzteile“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast