dpss tuning to 0.5W?

Usage, assemblance and modifications of solid-state and diode-lasers (not: laserpointers)
Gesperrt
djwacko
Beiträge: 24
Registriert: Di 07 Okt, 2003 6:06 pm
Wohnort: Belgium temse

dpss tuning to 0.5W?

Beitrag von djwacko » Mo 25 Jul, 2005 2:57 pm

hi, i have green dpss module from "dreamlasers.com". the module is rated 35mW but the diode says "max 0,5w @ 500mA". is it possible to tune this diode ( and extra cooling) to 0,5w

i think that the driver can handle 500mA but can the diode do this, and what will do this regarding the life time of the diode?

please someone help me.

thanks for the effort

john
Beiträge: 1823
Registriert: Mi 13 Jun, 2001 12:00 pm
Wohnort: Berlin

Beitrag von john » Mo 25 Jul, 2005 3:43 pm

0,5 W is the diode´s max. infrared output power, not the output of the green laserlight. There is a frequency conversation unit containing some crystals inside a DPSS which´s conversation rate is far, far away from 100%, perhaps 10 to 20%. Actually your diode is already emitting 500mw.

John

djwacko
Beiträge: 24
Registriert: Di 07 Okt, 2003 6:06 pm
Wohnort: Belgium temse

Beitrag von djwacko » Mo 25 Jul, 2005 3:54 pm

:( damm, i so hoped to have a 0.5W laser. but thanks for your response

Benutzeravatar
acerays
Beiträge: 5
Registriert: Di 01 Nov, 2005 11:47 am

Beitrag von acerays » Mi 16 Nov, 2005 5:46 am

If you need 0.5Watt green laser, Rumzing has 0.5Watt, qulity is accredited very good, stablity is 3%, you can contact with them, www.rumzing.com
but, if you need, I have one 700mw, that is new one, with 12 months warranty, TTL or Analogue modulation.

Benutzeravatar
acerays
Beiträge: 5
Registriert: Di 01 Nov, 2005 11:47 am

your need on 0.5Watt

Beitrag von acerays » Mi 16 Nov, 2005 5:50 am

If you need 0.5Watt green laser, you can contact Rumzing, they have 0.5Watt green, their laser is accredited very good quality, 3% stability, their information www.rumzing.com
but if you want to get it soon, I have one 700mw, also 3% stablity, 720mw output power of green light, TTL or Analogue modulation, it has 12 months warranty.

Benutzeravatar
tracky
Beiträge: 4843
Registriert: Di 11 Mär, 2003 1:51 pm
Do you already have Laser-Equipment?: Hat sich im Laufe der Jahre doch einiges angesammelt
Wohnort: Germany, Seefeld bei Werneuchen
Kontaktdaten:

Beitrag von tracky » Mi 16 Nov, 2005 12:14 pm

Hello djwacko,

you can tune this DPSS with a laser diode c-mount package 1W infra red power. You need a TEC for intern cooling the unit. 1W/808nm is the maximum power for your crystal combination.
Your maximal output power is 200mW/532nm. Your driver unit is only for 500mW laser diode. Maximal current is only 800mA! You need a driver with 1,4A current and TEC control.
For higher output power you need beam shaping and 2W/808nm with other crystals!
Gruß Sven

Laser? Was ist das? Licht aus super erschwinglichen Restbeständen

Benutzeravatar
acerays
Beiträge: 5
Registriert: Di 01 Nov, 2005 11:47 am

by new diode

Beitrag von acerays » Do 17 Nov, 2005 4:05 am

yes, you need change a new diode, 808nm, 2Watt, 1.1A current. then, maybe can get 500mw 532nm power.

Gast

Re: by new diode

Beitrag von Gast » Mo 19 Dez, 2005 3:42 pm

acerays hat geschrieben:yes, you need change a new diode, 808nm, 2Watt, 1.1A current. then, maybe can get 500mw 532nm power.
Hello,
you can not tune any dpss that is build for 35mW 532nm to 500mW 532nm.
You have to think about thermal lense and cooling. If the resonator
is to sensitive for thermal lenses, the power will drop at high pump power.
Sometimes it helps if you adjust the laserresonator and also try to get more
pump power into the laser cavity mode. I think that it is possible to get 100mW from a laser that was made for 35mW if it has descret crystals
inside.

greetings,
marco

Gesperrt

Zurück zu „Solid-state laser“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste