LaserFreak Forum

Hi tracky, look please on your controller: - if on PC board are three XCF01S** chips (U24 on top side, U19&U20 on bottom side) - it is version of controller which can make ethernet support. Of cource, you will need additional Ethernet module :) ; - If here are only one or two these chips - these con...

Dear tracky,
can you repeat your question in English?
I will try to answer your question...

All the best
Ihor

Liebe freunde!

Very sorry for my delay: I had crash harddisk with my post....

Write me please what you need, and I will send you.
(if possible repeat your question in English - my German is very bad)

Ihor

Try please connect DMX-out to DMX-in (without your DMX source)

Ihor

Hi Leander,
First of all try please DMX test program from RIYA: possible you have not right connections

Ihor

RIYA Co Ltd proud to announced new (microprocessor-based) line of laser show controllers – RIYA MultiBus controllers (in three versions: Pro, Basic (boxed and OEM), and Micro) Common parameters for all versions: - Real time translation by USB (all models) and Ethernet (Pro and Basic) interfaces; - ...

Hi scoborgLL,
write me please to email about your problems - possible I can help you

All the best
Ihor

Hi all!
Unfortunately I do not know French, and not fully understand all of reports...
But I want to say that RIYA 3_in_1 controller supports 6 colors + Intensity + Shutter (all - analod, 8 bit resolution), on all (USB, PCI and Ethernet) modes

Ihor Ralko

Hi all, I will be very glad to visit Hamm too, but unfortunately I have no visa. But I think for laserist will be interest to look and try our last developing - RIYA MultiBus board http://www.riyalasers.com/download/MultiBus_controller.doc It is very short time up to meet... If anybody of laserist l...

Liebe Freunde, I see here critic (probably "killing") Lennart for their politic, and I want to write my opinion! Why nobody here not told about software "as whole", and price "as whole"? Can you point here software with similar possibility and with such price? 15 000 Euro for 1 Watt projector is goo...

Dear Tobi, You point photo of show near Opera in my city!!! Was be very interest to have a meet in Lviv! Tell me "as laserist-to-laserist": your light&laser show was done "by shedule", or you had some problems? Was many differences between show "de-facto" and announce in the press.... All the best I...

Dear darkblue, First: meter please voltage between "negative" and "positive" lines (when you use differential signal), and between "ground" and "positive" line (when you use single mode signal, and "negative" line is connected to "ground") Second: for testing use please our test-program (LDS and Pho...

Hi Andi, >>> Good looking new hardware! You remain true to FPGAs. The technical details are auspicious. Thank you! >>> When can be bargain for the new board? Some tens of controllers (without Ethernet module) are ready jet. Ethernet module we will have up to end of September >>> When will there be i...

Hello Franck, I agree, that will be more effective to use switching power supply. But... I try used MC33063 and MC34063 chips. But these chips begin work after 9V input (it is for 2,5V and 3,3V). For +5V (power supply for FT245 chip) I must have min. 11V power supply. But I need +/- 9V too. I make i...

Hi Franck, Using switching power supply like LM2575 or LM2678 - it is a good idea, but our old USB boxes had a not big size, and additional power supply chip can make a hard temperature mode for controller as whole. We have in controller +3,3V, +2,5V, +5v, +9V, -9V power supply, which we make from s...

RIYA Co Ltd proud to announce new line of laser cards - RIYA 3_in_1 and RIYA OEM controllers. RIYA 3_in_1 can work: in USB mode: http://www.riyalasers.com/images/multibus/3_in_1_usb_1_25%20copy.gif in PCI mode: http://www.riyalasers.com/images/multibus/3_in_1_sm%20copy.gif in Ethernet mode (with add...

Dear Sven, First of all try please work two cards together with RIYA test program (from C:\Laser\RIYA\ directory). Try please control from "DIRECT" window. If RIYA test work - search please error in configuration file of LDS. If RIYA test doesn't work: - Write please type of your cards; - Write plea...

Hallo laserfreaks... Sorry for long delay with answer... We have written new dll, which (I hope :) ) will allows to work RIYA USB controller together with other FTDI based cards. Unfortunately, we have only our cards now, therefore : people, who have random cards: - rename please RiyaNetServer.dll o...

Dear Cyrax! Point please why software you use within testing. Please use for testing of voltage our test program, or meter amplitude by oscilloscope. Why? Some software products make some pause (blanking) inside of laser frame, therefore effective voltage is less that maximal. You can see it by osci...

Hallo all,
We have done Linux support for PCI Pro cards, we have done Linux support for USB cards, but, unfortunately, we don't have any user for Linux.

Ihor Ralko
RIYA Co

Hallo, @JoJo, thank you for table editing, And if you think, that I do not like your controller - you are mistaken! We are competitors, but first of all we are engineers-developers, and "freakers" of our work, also I respect other development! @Michael, in Frankfurt please search me by Jens Rau (Boc...

Hallo, @JoJo, edit please last document (in RIYA columns): - about DMX: should be {* line (512 channels)} instead {* channels }; - about Firmwareupdate: Yes, by USB - for USB card (and "no" for PCI :) ) And question to you: - what means, that you not point "Point-to-point time tolerance, max" and "F...

Hi Michael,

We stop development of SmartMedia card: we do not see interest for this production from our clients.

All the best
Ihor

Hi sanaia, A good idea - to make compare of laser controllers. I suggest manufacturers of laser controllers to bring the data about their production to one table (for comparing). Original of this table (in WORD format) you can download http://www.riyalasers.com/download/Laser_controllers.doc Unfortu...

Hi JoJo, I think, our discussion is not correct. Manufacturer should have description for our products, where are point type, parameters of signals and example of connection. User must provide correct connection yourself, or receive support from manufacturer (if his qualification is not enough). ......

Hallo Zusammen, @Tschosef: Shpannung X/Y ist -5 bis +5 Volt (10V Differenz) in all type of RIYA cards (it is full compatible with ILDA standard (look please ISP specification on www.ilda.wa.org) X Controls the horizontal beam position. This is a bipolar analog signal whose voltage range is 10V peak-...

Hi Michael, Our PCI card have two DMX outputs and one input (isolated), USB card have one DMX output and one input (no isolated). For PCI card: Connector DHR-15F Pin 1 + DMX output (channel 1) Pin 2 - DMX output (channel 1) Pin 11 + DMX output (channel 2) Pin 12 - DMX output (channel 2) Pin 13 + DMX...

Hallo Leute! I'm very glad see opinion developers here (sorry, LDS forum, but I will talk about hardware). RIYA USB and bILDA have many differents in architecture. Both type of controllers should make two process simultaneously: - receiving data from PC; - sending data to DACs. RIYA use FPGA (it all...

Hallo Leute! I'm very glad see opinion developers here (sorry, LDS forum, but I will talk about hardware). RIYA USB and bILDA have many differents in architecture. Both type of controllers should make two process simultaneously: - receiving data from PC; - sending data to DACs. RIYA use FPGA (it all...

Hi Gento, Unfortunately, I not understand your dialog with Richi (sorry, my Deutsh is bad...). For me will be better see your questions and write answer. I have written data about our card below, but not see your commentaries or questions. I try answer to your replic: Was hat die Speedausgabe mit de...

Liebe freunde! Look please comparing of PCI and USB card: PCI card have two DMX out and one DMX in (isolated), USB have one out and one in (no isolated). PCI card have control from music, USB - no. PCI card have Z DAC, USB - no. Maximal size of cadr in PCI card is 16 000 points, in USB - 4 000 point...

Hallo JoJo and Hatschi, Sorry. you say, that my messages are werbung. But what can you tell about forums: LaserDesignStudio, Pangolin, LaserPainter, LAStudio, bILDA, Popelscan... Isn't it a werbung? My opinion: this is forum for freakers, and for people is interest all news and new developing. Best ...

Hallo Andi,

New USB device is FPGA design (as earlier).
Smartmedia support is not realised now.

About connector for DMX:
We choice good case, but don't have plase in this case for other type connector

Therefore we use RJ-45 with shield (for "common" line).

Ihor

Hallo, Look please our new development - USB device: http://www.riyalasers.com/images/USB_case.jpg http://www.riyalasers.com/images/USB_top.jpg http://www.riyalasers.com/images/USB_bot.jpg This card provide 55 000 PPS with 16-bytes structure of point (X&Y - 12 bit, R, G, B, DB, Yellow, Cyan, Intens,...

Hi Achim, You point a good devices, but I can't garantee work RIYA cards by them - we must try. If this device have good drivers, which allows work by two drivers (our and their) - then no problem!!! But we have better solution - we have ended network support for our cards (in our additional softwar...

LaserFreak Forum

Die Suche ergab 47 Treffer

Re: LDS / Phönix im Netzwerk

Re: LDS / Phönix im Netzwerk

New lasershow controllers from RIYA

New lasershow controllers from RIYA